Isochem Series
Pulsafeeder’s Isochem pumps safely handle hazardous, highly corrosive, explosive, or toxic chemicals. They provide safe, leak-free service because the magnetic coupling eliminates the need for traditional sealing methods, such as mechanical seals or packing, the main source of leakage problems on pumps. As a result, downtime and maintenance costs are greatly reduced. And there are no worn seals to replace. With Isochem Accessories such as Pedestal Assembly, Heating Jackets and Flanges you can customize your pump for you needs.
Industrial Construction
Isochem pumps are offered in two different designs, centrifugal and positive displacement gear type, providing extensive capabilities. The CM Series of centrifugal pumps is
available as single or multi-stage units. The GMC Series gear pumps are ideal for use when you encounter viscosity or suction life applications. They are available in 316
stainless steel, Alloy 20, and Alloy C construction for maximum chemical resistance. State-of-the-art magnetic technology
a provides a safe and reliable pump for difficult applications. The drive magnet assembly is fixed to the motor shaft. The driven magnet assembly is attached to the pump
shaft and rotates when the drive magnet rotates as a result of magnetic forces. The high torque capability of the neodymium iron and rare earth samarium cobalt permanent
magnets alleviates the possibility of coupling slippage. The 316 SS and Alloy C Can separates the magnetic assemblies and contains the liquid.
Application Expertise
Isochem Series pumps offer two principal designs to handle a broad range of applications over wide temperature, viscosity, and pressure variations. They are ideal for vacuum
service and transfer of expensive, hazardous and/or corrosive chemicals over the entire pH range. Seal-less features make them perfect for environments subject to federal
regulations.
Isochem Series Product Scope / Key Features
- Flows to 55 gpm (250 lpm)
- Pressures to 250 psi (17.2 bar)
- Temperatures to 450° F (232° C)
- Viscosities to 100,000 cps
AVAILABLE MODELS
- Series GMC1
- Pressures to 100 psig (6.90 bar)
- Flow Capacity to 0.75 gpm (3.41 lpm)
- Viscosities to 1000 cps
- Series GMC2
- Pressures up to 100 psig (6.90 bar)
- Flows up to 1.5 gpm (6.82 lpm)
- Viscosities to 100,000 cps
- Series GMC4
- Pressures to 100 psig (6.90 bar)
- Flows up to 3 gpm (13.64 lpm)
- Viscosities to 100,000 cps
- Series GMC6
- Pressures to 100 psig (6.90 bar)
- Flows up to 10 gpm (45.46 lpm)
- Viscosities to 100,000 cps
- Series GMC8
- Pressures to 50 psig (3.45 bar)
- Flows up to 22 gpm (100 lpm)
- Viscosities to 100,000 cps
- Series GMH6
- Pressures to 200 psig (13.8 bar)
- Flows up to 10 gpm (45.46 lpm)
- Viscosities to 100,000 cps
- Series GMH8
- Pressures up to 100 PSI (6.9 BAR)
- Flows up to 22 gpm (100 lpm)
- Viscosities to 100,000 cps
- Series GM12
- Pressures to 100 psig (6.90 bar)
- Flows up to 28 gpm (127 lpm)
- Viscosities to 100,000 cps
- Series GM16
- Pressures to 100 psig (6.90 bar)
- Flows up to 55 gpm (250 lpm)
- Viscosities to 100,000 cps
- Series CMC1
- Pressures up to 150 psig (10.34 bar)
- Flows up to 54 gpm (245.48 lpm)
- Viscosities to 100 cps
- Series CMH1
- Pressures up to 250 psig (17.24 bar)
- Flows up to 94 gpm (427.32 lpm)
- Viscosities to 100 cps
- Series CMH2
- Pressures up to 250 psig (17.24 bar)
- Flows up to 94 gpm (427.32 lpm)
- Viscosities to 100 cps
- Series CMH3
- Pressures up to 250 psig (17.24 bar)
- Flows up to 94 gpm (427.32 lpm)
- Viscosities to 100 cps
- Series CMH4
- Pressures up to 250 psig (17.24 bar)
- Flows up to 94 gpm (427.32 lpm)
- Viscosities to 100 cps
- Series CMH5
- Pressures up to 250 psig (17.24 bar)
- Flows up to 94 gpm (427.32 lpm)
- Viscosities to 1000 cps