PULSAtron PLUS Series

Water treatment professionals are under constant pressure to understand new chemical treatment programs. While some applications require sophisticated control systems with multi- parameter inputs and outputs, many installations can be satisfied with a simpler approach. The PULSAtron PLUS is the ideal choice when basic control is all that is required. PULSAtron PLUS is a unique family of products that combine basic control functions into a PULSAtron pump, eliminating the need for separate pieces of equipment. Available across a full range of pump capacity and pressure ratings each member of the PULSAtron PLUS family incorporates a variety of control features that target specific applications.

Series CL Conductivity Control with Limit Timer
The Series CL provides conductivity monitoring and control with a Limit Timer that controls the feed time. Tower feed and bleed are initiated when the conductivity level reaches the user-specified set point. The programmable limit timer allows the operator to specify the maximum pumping time for the feed cycle. The Series CL includes a conductivity sensor, bleed relay and a user programmable limit timer.

Series CW Conductivity Control with Water Meter Feed
The Series CW provides conductivity control with a water meter feed. Bleed is initiated when the conductivity level reaches the user-specified set point. Chemical feed is initiated and controlled by input from a water meter. The Series CW includes a solenoid actuated metering pump, conductivity sensor, bleed relay and a dry contact input for water meter control.

Series ET Feed Control with Water Meter Input
The Series ET provides feed control with input from a water meter input. When the count exceeds a set value (either 1 or 10), the pump starts .The pump will continue to run for an adjustable time period. The Series ET includes both input and output water meter connections at the front panel. The out-put connection provides an isolated dry contact output of the water meter contact to operate additional pumps or timers off the same water meter.

Series T7 Feed Control with 7 Day Timer
The Series T7 was designed to control the feeding of biocide or other product that must be fed on timed schedule. The Series T7 includes a 7-day programmable timer and clock with the ability to control up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-daycycle. The feed cycle is initiated and controlled by the user programmable timer.

Series WT Feed & Bleed Control with Water Meter Input
The Series WT provides feed and bleed control with a water meter input. The feed and bleed cycles are initiated and controlled by input from the water meter. Separate programmable pulse timers control the pump and bleed relay. The Series WT includes a flow input, water meter input and two programmable pulse timers.

PUSLAtron PLUS Series Product Scope

• Flows to 504 gpd (79.5 lph)
• Pressures to 250 psi (17 bar)
• Temperatures to 150° F (66° C)
• Viscosities to 3000 cps